GeneralProjectSettings

class StressUnits(*values)

Bases: Enum

METRIC = 1

IMPERIAL = 2

class TimeUnits(*values)

Bases: Enum

SECONDS = 1

MINUTES = 2

HOURS = 3

DAYS = 4

YEARS = 5

class Metric_PermeabilityUnits(*values)

Bases: Enum

SLIDE_PERMEABILITY_UNITS__M_SEC = 1

SLIDE_PERMEABILITY_UNITS__M_MIN = 2

SLIDE_PERMEABILITY_UNITS__M_HOUR = 3

SLIDE_PERMEABILITY_UNITS__M_DAY = 4

SLIDE_PERMEABILITY_UNITS__M_MON = 5

SLIDE_PERMEABILITY_UNITS__M_YEAR = 6

SLIDE_PERMEABILITY_UNITS__CM_SEC = 7

SLIDE_PERMEABILITY_UNITS__CM_MIN = 8

SLIDE_PERMEABILITY_UNITS__CM_HOUR = 9

SLIDE_PERMEABILITY_UNITS__CM_DAY = 10

SLIDE_PERMEABILITY_UNITS__CM_MON = 11

SLIDE_PERMEABILITY_UNITS__CM_YEAR = 12

SLIDE_PERMEABILITY_UNITS__MM_SEC = 13

SLIDE_PERMEABILITY_UNITS__MM_MIN = 14

SLIDE_PERMEABILITY_UNITS__MM_HOUR = 15

SLIDE_PERMEABILITY_UNITS__MM_DAY = 16

SLIDE_PERMEABILITY_UNITS__MM_MON = 17

SLIDE_PERMEABILITY_UNITS__MM_YEAR = 18

class Imperial_PermeabilityUnits(*values)

Bases: Enum

SLIDE_PERMEABILITY_UNITS__FT_SEC = 1

SLIDE_PERMEABILITY_UNITS__FT_MIN = 2

SLIDE_PERMEABILITY_UNITS__FT_HOUR = 3

SLIDE_PERMEABILITY_UNITS__FT_DAY = 4

SLIDE_PERMEABILITY_UNITS__FT_MON = 5

SLIDE_PERMEABILITY_UNITS__FT_YEAR = 6

SLIDE_PERMEABILITY_UNITS__IN_SEC = 7

SLIDE_PERMEABILITY_UNITS__IN_MIN = 8

SLIDE_PERMEABILITY_UNITS__IN_HOUR = 9

SLIDE_PERMEABILITY_UNITS__IN_DAY = 10

SLIDE_PERMEABILITY_UNITS__IN_MON = 11

SLIDE_PERMEABILITY_UNITS__IN_YEAR = 12

SLIDE_PERMEABILITY_UNITS__I_M_SEC = 13

SLIDE_PERMEABILITY_UNITS__I_CM_SEC = 14

SLIDE_PERMEABILITY_UNITS__I_MM_SEC = 15

class FailureDirection(*values)

Bases: Enum

RIGHT_TO_LEFT = 1

LEFT_TO_RIGHT = 2

class DataOutputMode(*values)

Bases: Enum

STANDARD = 1

MAXIMUM = 2

class GeneralProjectSettings(model_id: str, client: Client)

Bases: object

Examples: Code Snippet: General Example

General project settings for the model.

getStressUnits() → StressUnits

Get the stress units (METRIC or IMPERIAL).

setStressUnits(stress_units: StressUnits)

Set the stress units (METRIC or IMPERIAL).

getTimeUnits() → TimeUnits

Get the time units.

setTimeUnits(time_units: TimeUnits)

Set the time units.

getMetricPermeabilityUnits() → Metric_PermeabilityUnits

Get the metric permeability units. Only valid if stress_units == METRIC.

setMetricPermeabilityUnits(permeability_units: Metric_PermeabilityUnits)

Set the metric permeability units. Only valid if stress_units == METRIC.

getImperialPermeabilityUnits() → Imperial_PermeabilityUnits

Get the imperial permeability units. Only valid if stress_units == IMPERIAL.

setImperialPermeabilityUnits(permeability_units: Imperial_PermeabilityUnits)

Set the imperial permeability units. Only valid if stress_units == IMPERIAL.

getFailureDirection() → FailureDirection

Get the failure direction.

setFailureDirection(failure_direction: FailureDirection)

Set the failure direction.

getDataOutputMode() → DataOutputMode

Get the data output mode.

setDataOutputMode(data_output_mode: DataOutputMode)

Set the data output mode.