GroundwaterProjectSettings#

class WaterType(*values)#

Bases: Enum

SL_HU = 1#

SL_RU = 2#

SL_TOTAL_HEAD = 3#

SL_PRESSURE_HEAD = 4#

SL_PORE_PRESSURE = 5#

SL_GROUNDWATER = 6#

SL_TRANSIENT_FEA = 7#

class GroundwaterAdvancedOption(*values)#

Bases: Enum

SLIDE_GW_ADVANCED_TRANSIENT = 1#

SLIDE_GW_ADVANCED_EXCESS_PP = 2#

SLIDE_GW_ADVANCED_RAPID_DRAWDOWN = 3#

class RapidDrawdownMethod(*values)#

Bases: Enum

SLIDE_RD_DUNCAN_WRIGHT_WONG_3STAGE = 1#

SLIDE_RD_ARMY_CRP_ENG_2STAGE = 2#

SLIDE_RD_LOWE_KARAFIATH_2STAGE = 3#

SLIDE_RD_EFFECTIVE_STRESS_BBAR = 4#

class RapidDrawdownInterpolationMethod(*values)#

Bases: Enum

SLIDE_RDD_INTERP_DUNCAN_WRIGHT_WONG = 1#

SLIDE_RDD_INTERP_VANDENBERGE_WRIGHT = 2#

class GridInterpolationMethod(*values)#

Bases: Enum

SL_THINPLATESPLINE = 1#

SL_CHUGH = 2#

SL_LOCALTHINPLATESPLINE = 3#

SL_TINTRIANGULATION = 4#

SL_INVERSEDISTANCE = 5#

SL_LINEARBYELEVATION = 6#

SL_ORIGINALCHUGH = 7#

SL_KRIGING = 8#

class WaterGridPoint(x: float, y: float, value: float)#: Bases: object

class GroundwaterProjectSettings(model_id: str, client: Client)#

Bases: object

Examples: Code Snippet: Groundwater Example

Groundwater (water pressure / FEA) project settings.

getWaterType() → WaterType#: Get water pressure type (Hu, Ru, Groundwater, etc.).

setWaterType(water_type: WaterType)#: Set water pressure type.

getPoreFluidUnitWeight() → float#: Get pore fluid unit weight.

setPoreFluidUnitWeight(value: float)#: Set pore fluid unit weight.

getUseAdvancedGroundwater() → bool#: Get whether advanced groundwater (Transient / Excess PP / Rapid drawdown) is enabled.

setUseAdvancedGroundwater(use: bool)#: Set whether advanced groundwater is enabled.

getGwAdvancedOption() → GroundwaterAdvancedOption#: Get advanced groundwater option when advanced is enabled.

setGwAdvancedOption(option: GroundwaterAdvancedOption)#: Set advanced groundwater option.

getRapidDrawdownMethod() → RapidDrawdownMethod#: Get rapid drawdown method.

setRapidDrawdownMethod(method: RapidDrawdownMethod)#: Set rapid drawdown method.

getRapidDrawdownInterpolationMethod() → RapidDrawdownInterpolationMethod#: Get rapid drawdown interpolation method.

setRapidDrawdownInterpolationMethod(method: RapidDrawdownInterpolationMethod)#: Set rapid drawdown interpolation method.

getGridInterpolationMethod() → GridInterpolationMethod#: Get grid interpolation method for water pressure.

setGridInterpolationMethod(method: GridInterpolationMethod)#: Set grid interpolation method.

getWaterGridPoints() → List[WaterGridPoint]#: Get water grid points as list of (x, y, value) tuples.

setWaterGridPoints(points: List[WaterGridPoint])#: Set water grid points from list of (x, y, value) tuples.

getMaxIter() → int#: Get max iterations for steady-state FEA.

setMaxIter(max_iter: int)#: Set max iterations.

getTolerance() → float#: Get convergence tolerance for steady-state FEA.

setTolerance(tolerance: float)#: Set convergence tolerance.

getUseMaximumNegativePorePressure() → bool#: Get whether maximum negative pore pressure limit is used.

setUseMaximumNegativePorePressure(use: bool)#: Set whether to use maximum negative pore pressure limit.

getMaximumNegativePorePressure() → float#: Get maximum negative pore pressure value.

setMaximumNegativePorePressure(value: float)#: Set maximum negative pore pressure.